M1.8 Metric Thread

Below are the key dimensions for M1.8 metric threads: pitch, tap drill and clearance drill according to ISO 724:2023.
Welcome to our M1.8 Metric Thread Page. This platform provides rapid measurements for M1.8 metric threads. We've assembled a vast collection of information for all standard metric threads that you will use in your parts, including primary metrics like thread pitch, tap drill, and clearance drill. Engineers, machinists, and hobbyists seeking accurate and dependable information will find this page invaluable.
All dimensions stated in are mm (millimetre)
The Major Diameter is the largest diameter on the thread and is measured from the thread crest to crest (peak of the thread).
This is the distance (mm) from one thread to the next, this can be measured from tip to tip or groove to groove. Pitch can also be defined as TPI, which stands for threads per inch.
Minor Diameter is the smallest diameter on the thread and is measured from the thread root to root (Bottom of the thread).
The angle between the thread faces. 60 degrees in the example above.
The thread will assemble when rotated clockwise. "righty tighty lefty loosely"
The thread will assemble when rotated counter-clockwise.
The pitch for an M1.8 thread is 0.35 mm.
The tap drill for an M1.8 thread is 1.45 mm.
The clearance drill for an M1.8 thread is 2.1 mm.