M1.4 Metric Thread Dimensions and Pitch
Below are the key dimensions for M1.4 metric threads: pitch, tap drill and clearance drill according to ISO 724:2023.
M1.4 Coarse (standard)
Step into our M1.4 Metric Thread Page, your comprehensive reference for swift metrics on M1.4 metric threads. We've compiled a wide-ranging database for all the standard metric threads used in your parts, emphasising critical measurements like thread pitch, tap drill, and clearance drill. This page is an all-in-one destination for engineers, machinists, and hobbyists seeking precise and dependable details.
M1.4 Coarse Pitch Dimensions
M1.4 Fine Pitch Dimensions
All dimensions stated in are mm (millimetre)
ISO Metric Thread profile
The Major Diameter is the largest diameter on the thread and is measured from the thread crest to crest (peak of the thread).
This is the distance (mm) from one thread to the next, this can be measured from tip to tip or groove to groove. Pitch can also be defined as TPI, which stands for threads per inch.
Minor Diameter is the smallest diameter on the thread and is measured from the thread root to root (Bottom of the thread).
The angle between the thread faces. 60 degrees in the example above.
The thread will assemble when rotated clockwise. "righty tighty lefty loosely"
The thread will assemble when rotated counter-clockwise.