M33 Metric Thread Dimensions and Pitch
Below are the key dimensions for M33 metric threads: pitch, tap drill and clearance drill according to ISO 724:2023.
M33 Coarse (standard)
Immerse yourself in our M33 Metric Thread Page, your go-to tool for swift measurements on M33 metric threads. We've curated an extensive database for all the common metric threads you'll use in your components, focusing on essential metrics like thread pitch, tap drill, and clearance drill. It's a one-stop-shop for professionals and hobbyists looking for accurate and reliable information.
M33 Coarse Pitch Dimensions
M33 Fine Pitch Dimensions
All dimensions stated in are mm (millimetre)
ISO Metric Thread profile
The Major Diameter is the largest diameter on the thread and is measured from the thread crest to crest (peak of the thread).
This is the distance (mm) from one thread to the next, this can be measured from tip to tip or groove to groove. Pitch can also be defined as TPI, which stands for threads per inch.
Minor Diameter is the smallest diameter on the thread and is measured from the thread root to root (Bottom of the thread).
The angle between the thread faces. 60 degrees in the example above.
The thread will assemble when rotated clockwise. "righty tighty lefty loosely"
The thread will assemble when rotated counter-clockwise.